| Dremel 290-05 120-Volt Industrial Engraver |  | Brand: Dremel
List Price: $37.90
Buy New: $19.99
as of 9/8/2010 17:08 EDT details
You Save: $17.91 (47%)
New (6) from $19.99
Seller: Hardware Sales Inc.
Rating:  4 reviews
Sales Rank: 12,842
Media: Tools & Hardware
Number Of Items: 1
Shipping Weight (lbs): 1
Dimensions (in): 8.9 x 3.6 x 3.6
MPN: 290-05
Model: 290-05
UPC: 080596027377
EAN: 0080596027377
ASIN: B000VZIGA0
Availability: Usually ships in 1-2 business days
| |
| Features:
| | Amperage: 0.2 Amps | | | Hertz: 60 Hz | | | Speed: 7,200 spm | | | Voltage: 115 V AC, 60Hz |
|
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
290-05 Style: Inc. (3) 9924 Carbide Engraving Points, Price Each This item features: -Stroke adjustment dial regulates engraving depth. -Light and compact design for precision engraving. -Engraves metal, glass, wood, plastic, and ceramics. -Soft grip has been added to provide extra control and comfort. -Packed in a plastic tube. -Voltage: 115.00 VAC. -Frequency: 60.0 Hz. -Cycle Rate: 7200 strokes/min [Max]. -Power Source: Electric. -Wt.: 0.85 lb.
|
| Customer Reviews:
 High quality, but a bit large September 28, 2009
Moderate American Man (Arizona, USA)
4 out of 4 found this review helpful
I have used Inscriblio engravers, poor quality chinese engravers, and now this Dremel engraver. The Dremel is easily the highest quality, and best value. My only complaint is that it's size and shape make it harder to use then the other light weight engravers. However I think I will get used to it, and it seems obvious that it will last much, much longer then either of the other engravers I have used in the past.
 Very disappointed April 22, 2009
Jamie R. Deem (Orlando, FL)
20 out of 24 found this review helpful
I bought this engraver to mark all of my tools with serial numbers and my name. On the very first tool, after engraving the serial number, the diamond tip began to loosen and slip out. I reached for the included little wrench with a standard screwdriver tip on one end to tighten the set screw that holds the diamond tip in the tool. I tried to use the screwdriver tip to tighten the slotted set screw and quickly discovered that the provided tool was too thick to fit into the groove in the set screw. I was a little miffed, but just walked over to a benchtop polishing wheel to remove a small amount of steel from the tool so that it would fit in the screw for which it was made. When I returned to the engraver to tighten the set screw the tool fit perfectly, and with one turn the screw, all the threads stripped out of the tool, not off the set screw. The set screw is just fine, but the metal that was threaded for it to go into is made of a metal so soft that it cannot withstand a single turn of the set screw that is essential to hold the diamond tip in place. I'm still rather incredulous that this tool would be made so poorly; perhaps they had a bad batch that got out on the market. If you already have one, with a soft metal housing for the diamond tip, you might wish to try some Locktite on the set screw and perhaps even the diamond tip where it contacts the soft metal housing. Be sure to take note of the different strengths of Locktite so that the bottle or tube you buy will be effective. My engraver will be going back, and I do not think I will be purchasing any more Dremel products in the near future.
good tool October 28, 2008
A. Walk
9 out of 10 found this review helpful
I have only used this tool a few times, but it has worked very well.
I was surprised at how thick of a piece of metal it will make a cut in.
 great tool May 12, 2008
Licari Woodworking, LLC (ct)
11 out of 11 found this review helpful
great little unit! works on all metals including saw blades and router bits. I am using the diamond tip with it. powerfull and not too loud. glad i own it.
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
| |
